1、環保：有組織排放配置三次催化設備，無組織排放要求對烘爐前后進行密封回收處理，漆箱、漆桶全部密封。
2、節能：蒸汽與烘干箱采用余熱利用裝置，0.10mm以上規格使用熱風循環設備，整機電耗低。
3、噪音：采用無聲設計，相關傳動部位(滾筒、收線盤等)都要進行動平衡校驗，減少震動與噪聲。
4、大盤化：0.10mm以下可收線重量達15kg，可按用戶要求設計更大收線重量。
5、自動化：多頭漆包機可采用激光排線、自動換盤、自動張力控制，設備具有開機不換盤停頭、光銅絲自動停頭功能。
6、漆膜自動調整：在收線前安裝激光測徑儀對每一條線進行線徑檢測，并根據測出的線徑數據大小調節漆輥的轉速，從而調節漆膜的厚度。
7、設備監視：烘爐、退火爐溫度，傳動與液位（含涂油、漆箱、漆槽）裝置全部含有報警功能，將線徑漆膜、收線重量對應的頭號等傳送到本機電腦主頁面顯示。
8、信息化：收線重量等實時數據、斷線和換盤信號、所有報警信號、耗電量等全部連接到本地主機。多臺漆包機的數據可以通過網絡連接到辦公室或手機，供管理人員及時了解機臺的運行情況。

1. Environmental protection： Organized discharge equipped with three times catalytic, unorganized discharge requires sealing the fore and rear of oven and recovery treatment, enamel tank and enamel barrel are all sealed.
2. Energy saving: steam and drying box are heat energy reuse type, if the wire diameter above 0.1mm, the machine will be hot air circulation equipment.
3. Noise: Adopt silent design, the relevant transmission parts (roller, take up bobbin, etc.) must be checked by dynamic balance to reduce vibration and noise.
4. Larger take up capacity: If wire diameter below 0.1mm, take up weight can reach 15Kg, which can be customized according to the client1 s requirements.
5. Automation: multi lines wire enameling machine adopts laser type takes up traverse, automatic change over and automatic tension control. The equipment is switched on without changing bobbin and stops the line when the wire become bare wire,
6. Auto-adjust the thickness of the paint film: Install a laser diameter gauge to check each line diameter before winding, and adjust the speed of the enamel roller according to the measured line diameter data size, so as to adjust the thickness of the enamel film.
7. Equipment monitoring: temperature of the oven, annealing furnace, transmission and liquid level (including oil, enamel tank, enamel applicator) devices all contain alarm function. Data of wire diameter, thickness of enamel film, take-up weight corresponding to which line can be transmitted and displayed on the computer of this machine.
8. Informatization: Real-time data such as take up weight, disconnection and change over signals, all alarm signals, power consumption and so on are connected to the local host. Data from multi-lines wire enameled machines can be connected to offices or mobile phones over the network for managers to keep abreast of the machine's performance.